Networking

Components used on making and extending a NMEA2000 Network.

Drop Cables for connecting a device to the NMEA 2000 Backbone

Backbone Cables for extending the NMEA 2000 network between T-Connectors

Network Interface for isolating sections of an NMEA 2000 network to decrease standby current draw while permitting data on both sides.

Terminate your NMEA 2000 network – regardless whether a male or female connection is required – and use the TER-U’s smart functionality to easily diagnose any power or voltage issues on your NMEA 2000 bus. The TER-U can be fitted directly at the end of your network or used as an in-line terminator in difficult to access locations.

The W2K-1 is a rugged and reliable NMEA 2000 to Wi-Fi Gateway with built-in data logger and Actisense-i diagnostic tools.

Two OPTO-isolated inputs and twelve ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.

Eight OPTO-isolated inputs and six ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.

Breathe new digital life into transducers, with digital signal processing technology. The DST-2 digitises depth, speed and temperature transducer signals into NMEA 0183 data to deliver best-in-class seabed tracking.

Isolate an RS232 (PC) port to protect against ground loops. The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port.

The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network. (USB cable not included)