Masterbus

The MasterBus CANopen Interface facilitates transparent, 2-way communication between MasterBus and the CANopen standard, which is adopted in many automotive and industrial automation applications.

The MasterBus Modbus Interface can provide all information from the ‘closed’ MasterBus network for other monitoring and operating systems by means of the Modbus protocol.

The MasterBus Inverter Interface integrates the Mastervolt Mass Sine Inverter in a MasterBus network and allows it to be operated and monitored via EasyView 5 or PC.

The MasterBus Serial Interface connects conventional Mastervolt products to MasterBus. Data becomes permanently available to allow configuration, operation and monitoring via EasyView 5 or PC. Suitable for Masterlink BTM-III, Mac and Magic DC-DC converters.

Switches all AC loads, no matter where they are. Loads up to 6A can be directly switched, higher loads should be switched via an external relay.

Connect up to four switches to the MasterBus network. Delivery includes connection cables.

The MasterBus Power Interrupter switches off parts of the MasterBus network. This reduces the no-load consumption and is useful if a large system will not be used for an extended period.

The MasterBus Repeater doubles the maximum length of your MasterBus network.

This interface converts analog sensor input signals to MasterBus data. Selectable input signals: 4-20 mA, 0-300 Ω, 8-70V DC.

MasterBus controllable potential-free contact, with alarm notification on the onboard system (low voltage or no AC), usable as CSI alarm contact.