| Characteristics | 
Control Module | 
Wireless Reciever Module | 
Switch 1-Button | 
Switch 2-Button | 
| Part Ref: | 
ITA000096 41.72119.XX XXXXXX | 
ITA000119 41.72120.XX XXXXXX | 
ITA000155 0F.INT221-2.4 | 
ITA000154 0F.INT222-2.4 | 
| Power Supply | 
8-32V DC | 
with CAN cable - 12VDC | 
Kinetic energy (Piezzo) | 
| Inputs | 
Up to 4 digital inputs for wired switches npn type | 
  | 
| Outputs | 
6 outputs | 
  | 
| Max.Current Per Output | 
5A | 
  | 
| Total Max. Current | 
20A/module | 
  | 
| Dimming | 
Light intensity regulation on each output with PWM | 
  | 
| Supply & Outputs Wire Cross Section | 
0.2 to 2.5mm² | 
  | 
| Coding & Inputs Wire Cross Section | 
0.2 to 1.5mm² | 
  | 
| Max. Number Of Pairing | 
128 (up to 4 pairings on a 2-button switch) Up to 32 2-button switches / 64 1-button switches | 
  | 
| Connectors | 
BUS CAN type 6-way Micro-Fit 2-way PicoMax outputs  6-way PicoMax inputs and coding | 
BUS CAN type 6-way Micro-Fit  Scheiber v8.0 Multibloc Protocol | 
  | 
| Antenna | 
  | 
PCB antenna | 
PCB antenna | 
| Firmware Version | 
  | 
8.00 or higher | 
- | 
| Number Of Buttons | 
  | 
- | 
1 | 
2 | 
| Transmission Range | 
  | 
20m indoor | 
20m indoor | 
Radio Standard  / Default Radio Channel | 
  | 
2.4 Ghz IEEE 802.15.4 channels 11 … 26  / IEEE 802.15.4 radio channel 11 | 
2.4 Ghz IEEE 802.15.4 channels 11 … 26  / IEEE 802.15.4 radio channel 11 | 
| Device Identification | 
  | 
Individual 32 Bit Device ID (factory programmed)) | 
| Security | 
  | 
AES128 (CBC) with Sequence Counter | 
| Energy Bow Travel/Force | 
  | 
1.8 mm / typ. 10 N (at room temperature) | 
| Number Of Operations At 25°C | 
  | 
typ. 100.000 (tested according to EN 60669 / VDE 0632) | 
| Certification | 
CE | 
CE | 
CE | 
| Environmental Conditions | 
Indoor use  Altitude up to 2000m  Operating temperature : 0 to +50°C Humidity : 0 to 93% without condensation | 
Indoor use  Altitude up to 2000m  Operating temperature : 0 to +50°C Humidity : 0 to 93% without condensation | 
-25°C to + 65°C | 
| Electrical Protection Of The Power Line | 
Fuse or circuit breaker | 
  | 
| Protection Calibre | 
16A if one power line in 2.5mm² 20A if two power lines in 2.5mm² | 
  | 
| Protection Position | 
accessible and identified for the user | 
  | 
| Dimensions (Lxwxh) | 
110 x 77 x 26 mm | 
146 x 48 x 13.5 | 
80 x 80 x 14.5 mm | 
| Mounting Distance | 
width: 60mm height: 100mm | 
vertical position : 50mm horizontal position : 129mm | 
  | 
| Weight | 
0.120 Kg | 
0.150 Kg | 
0.06 Kg |