CZone AC Output Interface (ACOI)

ACOI Standard Sample

The ACOI us usually made to order based on system design and requirements. A Typical module would consist of the following:

• 8 x 50A relays protected with 10A MCB’s
• Pre-wired
• Current monitoring on each channel
• IPX5 enclosure
• Dimensions (HxWxD): 17" x 10.8" x 7.3" / 430 x 276 x 186 mm
• Contact us with your requirment for a custom quote

ACOI Dinrail Mount

Available as an alternative where a custom AC Breaker Panel will be made. Available for either USA (ABYC) standard Black Wire Tails or APAC/Europe Brown Wire Tails.

• 8 x 50A relays
• Fitted with 600 mm tails
• Cost effective solution, own enclosures and MCB's can be sourced
• Current monitoring on each channel
• Dimensions (HxWxD): 3" x 6.3" x 2.4” / 77x160x60 mm
• Custom Cabinet and Circuit Breakers required under most clasification societies.

Specifications:

• Circuit status and run current displayed for each circuit
• Customizable to suit installation requirements
• Pre-wired for quick connection
• Staggered start up of loads
• 110V, 240V, 110/220V
• Supports multiple pole designs, i.e. double, triple, four pole
• Utilizes standard DIN rail mounted components for circuit protection and control
• Can support two separate buss feeds (i.e. 2 load groups) in one box
• Delay before circuits come on to allow generators to come up to speed
• Provides circuit protection and control
• Status LEDs at enclosure
• Manual bypass at enclosure
• Provision for MCB/RCDs
• Timers
• 50 or 60 Hz