ค้นหา
Filters
Close
Hella Marine SeaHawk XL Dual Colour Floodlights

Get the best of both worlds. Use Hella Marine's SeaHawk XL Dual Colour Floodlights to give two colour options in one.

CleatPort

It’s a simple idea, but very effective. Now your cleat can hold your fishing rod, mobile phone, drink, navlight, or anything else that a RAILBLAZA accessory can hold.
ผู้ผลิต: Railblaza

The cleat gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory.

Check out the video below for more information and ideas.

Also included is our unique backing plate (pictured below), designed to keep stainless fastenings isolated from aluminium decks to avoid corrosion.

MOUNTING INSTRUCTIONS:

  1. Drill holes using the backing plate as a guide.
  2. Stack plate and cleat in place then fit the two M6x25 screws in the two holes in line with the cleat handles.
  3. Tighten nuts or screw heads to a firm tension.
  4. Position StarPort on top lining the holes up with the two spare holes on the Cleat and fit the two M6x35 screws
  5. Repeat Step 3.
    – Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.

What You Get

1 x CleatPort Moulding
1 x StarPort
1 x Backing plate
2 x M6 x 25mm Machine Screws
2 x M6 x 35mm Machine Screws
4 x M6 Nuts
4 x M6 Washers

Construction Materials

CleatPort – UV stabilised fibreglass reinforced nylon plastic
StarPort – UV stabilised AES plastic
Locking Slide – UV stabilised PC plastic
Stainless steel fasteners
Recyclable packaging

The cleat gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory.

Check out the video below for more information and ideas.

Also included is our unique backing plate (pictured below), designed to keep stainless fastenings isolated from aluminium decks to avoid corrosion.

MOUNTING INSTRUCTIONS:

  1. Drill holes using the backing plate as a guide.
  2. Stack plate and cleat in place then fit the two M6x25 screws in the two holes in line with the cleat handles.
  3. Tighten nuts or screw heads to a firm tension.
  4. Position StarPort on top lining the holes up with the two spare holes on the Cleat and fit the two M6x35 screws
  5. Repeat Step 3.
    – Ensure you have adequate clearance behind the surface for screw and/or bolt penetration, and that no cabling, plumbing or rigging will be adversely affected.

What You Get

1 x CleatPort Moulding
1 x StarPort
1 x Backing plate
2 x M6 x 25mm Machine Screws
2 x M6 x 35mm Machine Screws
4 x M6 Nuts
4 x M6 Washers

Construction Materials

CleatPort – UV stabilised fibreglass reinforced nylon plastic
StarPort – UV stabilised AES plastic
Locking Slide – UV stabilised PC plastic
Stainless steel fasteners
Recyclable packaging

รูปภาพของ CleatPort Black
CleatPort Black
SKU: ITA043913
หมายเลขชิ้นส่วนผู้ผลิต: 03-4044-11
฿500.00 รวมภาษี
รูปภาพของ CleatPort White
CleatPort White
SKU: ITA043914
หมายเลขชิ้นส่วนผู้ผลิต: 03-4044-21
฿500.00 รวมภาษี