600 W
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles.
The SS75M transducer delivers up to 50 kHz of total bandwidth in just one installation and delivers amazing bottom detail and performance in shallow and medium depths out to 274 m (900')
SS75M transmits across the following bandwidth:
- Medium Frequency 80 to 130 kHz
Tilted element transducers have the element fixed at either a in 20°, 12°, or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.
SS75H:
The SS75H transducer delivers up to 80 kHz of total bandwidth in just one installation and delivers amazing bottom detail and fish target resolution.
SS75H transmits across the following bandwidth:
- High Frequency 130 to 210 kHz
Tilted element transducers have the element fixed at either a 20°, 12°, or 0° angle within the transducer housing. Because the transducer is installed almost flush to the hull, when the transducer is installed the tilt corrects for the hull deadrise and orients the ceramic element horizontally to assure maximum echo returns to the transducer.
The SS75M and SS75H is available in three Tilted Element™ models:
- Fixed 20° tilted version for 16° to 24° hull deadrise
- Fixed 12° tilted version for 8° to 15° hull deadrise
- Fixed 0° tilted version for 0° to 7° hull deadrise
Features:
- Depth and fast-response water-temperature sensor
- SS75M:
- 600 W with a maximum depth performance to 274 m (900')
- Medium Frequency: 80 to 130 kHz
- 24° to 16° beamwidth
- Medium frequency provides good shallow water performance, bottom detail and deeper performance than high frequency band
- SS75H:
- 600 W with a maximum depth performance to 214 m (700')
- High Frequency: 130 to 210 kHz
- 15° to 9° beamwidth
- High frequency provides great shallow water performance, bottom detail and clear fish target returns
- High performance, low-profile thru-hull housing provides good resolution at speed when installed properly
- Recommended boat size: Up to 8 m (25')
- Stainless steel housing is compatible with all hull types and materials
- Exclusive Xducer ID® and XSonic technology
